Do-Able DIY

So we've all seen those "do it yourself" posts that aren't so "do it yourself". But today I have the perfect post for you. Breakfast in bed just got better with this cute and easy serving tray. All you need is an old frame, some cute door handles and chalkboard paint. 

In a matter of minutes you'll have the perfect serving tray. Easy and so DIY!

DIRECTIONS : Serving Tray

1. Place your frame down on a good working surface in a landscape position.
2. Measure the frame from top to bottom and make a pencil marking in the middle of the frame on both the left and right sides.
3. Place your handles over this mark and make sure that the middle of your handle is over the pencil marking you have made.
4. Using a pencil lightly draw a circle on the frame around the top and the bottom of the handle .
5. Drill a hole through the centre of each of these circular markings that you have made.
6. Feed the bolts through the drilled hole from the backside of the frame. The bolts should meet up with the handle on the front side of the frame.
7. Screw the bolt into the base of the handles until tight on both the left and right side of the frame.
8. Download the free tray printables, print and trim to fit inside your frame behind the glass.

Thanks to The Pretty Blog for this cute post!